DTF color calibration

DTF color calibration, measured on pressed prints

You print our charts on your DTF film and mail the film to us. We press and measure it in our own lab, so every chart is handled the same way, then set up your printer and RIP from those measurements.

DTF Standard starts at$595 CMYK + White$995 Multicolor

Not sure? Start with the $195 Audit Credited toward any service booked within 30 days.

Mail-in and remote service · Measured in our own lab · Veteran-owned

Illustration: a color test chart pressed onto white cotton, with a grid of color and gray patches.
Illustration

Pressed and measured in our lab

We press and measure your DTF film for you

You print our charts on your film with your ink and powder, cure them, and mail the film. We press it in our own lab and measure every patch with a spectrophotometer, so every chart is handled the same way.

  • No press settings to get right for the test
  • No instrument to buy
  • Your report shows what we measured

DTF RIP calibration

Ink limits and linearization set on your RIP first

Before we build your profile, we set how much ink each channel lays down and even out the steps from light to dark. Your profile then starts from a stable printer.

Optimized

Choose the colors that matter most to your customers

With Optimized, you pick one color area to improve: reds, oranges and yellows, greens, blues, purples, skin tones, or neutrals and grays. Your report shows each color before and after.

  • 1 color area included
  • Extra color areas: $195 each

Installed with you

Your new DTF profile, installed on a remote call

We install your setup with you on a remote session and send your measurement report. You get 1 re-tune within 30 days of delivery.

Launch pricing

DTF calibration prices

Standard

from$595

CMYK + White $595 · Multicolor $995

Your printer set up correctly on your RIP, measured and reported.

  • 2 rounds: ink limits and linearization, then your custom ICC profile
  • Measurement report
  • 1 re-tune within 30 days
Choose Standard »
Recommended

Optimized

from$995

CMYK + White $995 · Multicolor $1,395

Everything in Standard, plus one color area you choose, improved and reported before and after.

  • 3 rounds, including a refinement round
  • 1 color area included: reds, skin tones, neutrals and more
  • Before and after report for each color
  • 1 re-tune within 30 days
Choose Optimized »

On-Site

from$1,500 for 1 printer

We come to your shop for 1 or 2 printers when curing or the room needs a visit.

  • Second printer at the same site +$500: from $2,000 for 2
  • Printers, curing, room, measuring and training
  • Per job, not per day: your written quote lists the on-site time
  • Profiles and travel extra; starts with the Audit
See on-site details »
Launch pricing. Each price covers 1 printer, 1 print mode and 1 film or substrate. CMYK + White and Multicolor are your printer's ink set. No RIP? Profile Only from $199 »

DTF prices by ink set and service

Each price covers 1 printer, 1 print mode and 1 film or substrate. Select a row to see that setup.

How DTF calibration works

  1. Tell us about your printer

    Your printer, RIP, ink and film. We check every answer before any work starts.

  2. Get your chart kit

    Print instructions and a prepaid US return label arrive by email.

  3. Print the charts

    Print with color management off. DTF: print on your film and mail the film; we press and measure it in our own lab. UV and sublimation: print or press on your final material.

  4. Mail them when we say so

    After we review your setup, we email private mailing instructions with your prepaid US return label. Please don't mail anything before then.

  5. We measure and build your setup

    Standard takes 2 rounds. Optimized takes 3.

  6. We install it with you

    On a remote session, then we send your report. Profile Only comes with an install guide.

Standard has 2 rounds and Optimized has 3, plus mail time. We confirm your expected timeline when we review your checklist, before any work starts.

What's included

Standard: 2 rounds (ink limits and linearization, then your profile) and a measurement report. Optimized: 3 rounds, one color area you choose, and a before and after report for each color.

Re-tunes within 30 days of delivery: Standard 1, Optimized 1 (UV and UV-DTF: 2).

Before any paid work, your written quote confirms the scope, price and terms for your printer.

Read the full terms »
See my price »

Prices are on the page. We review every request before any work starts.

DTF questions

For DTF, do I press the charts?

No. You print the charts on your film and mail the printed film to us. We press and measure it in our own lab, so every chart is handled the same way.

Do I need my own spectrophotometer?

No. You mail your prints and we measure them in our lab.

What's the difference between Standard and Optimized?

Standard sets your printer up correctly on your RIP in 2 rounds. Optimized adds a third round that improves the color area you choose, and you get a before and after report for each color.

What if I change ink or film?

That's a new print mode, so re-tunes don't cover it. Add it as an extra print mode.

How long does it take?

It depends on your service and mail time: Standard has 2 rounds and Optimized has 3. We confirm your expected timeline when we review your checklist, before any work starts.

Do you offer refunds?

Remote services can be refunded before you download your chart kit or schedule a session. Once work starts, they can't. Standard and Optimized include re-tunes instead. The Audit can't be refunded once we've measured your chart.

Two ways this can go

Keep going as you are

Adjust by eye, and reprint when a customer notices.

Mail us your charts this week

Print from a setup that's been measured.

Not sure? Start with the $195 Audit »