Sublimation color profiles

Custom sublimation ICC profiles for your printer, paper and fabric

Print our chart, press it on your fabric and mail it. We measure it and send your custom ICC profile with an install guide.

Profile Only, for printers without a RIP$199 1 media$298 2 media$397 3 media

Not sure? Start with the $195 Audit Credited toward any service booked within 30 days.

Mail-in and remote service · Measured in our own lab · Veteran-owned

Illustration: sublimation paper peeled from polyester fabric, revealing a transferred color chart.
Illustration

Sublimation ICC profile

A custom sublimation profile, no RIP needed

Most sublimation printers run on the printer driver. Profile Only is built for that: one chart round, a custom ICC profile for your printer, ink, paper and fabric, and an install guide.

Pressed on your fabric

Measured on the fabric you actually press

You press the chart onto your own fabric with your usual time and temperature, then mail it. We measure what your customers will actually get.

More than one media

Profile up to 3 media in one order

1 media is $199, 2 media are $298 and 3 media are $397.

See Profile Only »

Running a RIP?

Sublimation through a RIP? Choose Standard or Optimized

If your sublimation printer runs through a RIP, Standard or Optimized sets your ink limits and linearization first, then builds your profile.

Compare Standard and Optimized »

Profile Only prices

Media profiledPrice
1 media$199
2 media$298
3 media$397

For RIP users

Sublimation through a RIP

Standard

from$595

CMYK + White $595 · Multicolor $995

Your printer set up correctly on your RIP, measured and reported.

  • 2 rounds: ink limits and linearization, then your custom ICC profile
  • Measurement report
  • 1 re-tune within 30 days
Choose Standard »
Recommended

Optimized

from$995

CMYK + White $995 · Multicolor $1,395

Everything in Standard, plus one color area you choose, improved and reported before and after.

  • 3 rounds, including a refinement round
  • 1 color area included: reds, skin tones, neutrals and more
  • Before and after report for each color
  • 1 re-tune within 30 days
Choose Optimized »
Launch pricing. Each price covers 1 printer, 1 print mode and 1 film or substrate.

How it works

  1. Tell us about your printer

    Your printer, RIP, ink and film. We check every answer before any work starts.

  2. Get your chart kit

    Print instructions and a prepaid US return label arrive by email.

  3. Print the charts

    Print with color management off. DTF: print on your film and mail the film; we press and measure it in our own lab. UV and sublimation: print or press on your final material.

  4. Mail them when we say so

    After we review your setup, we email private mailing instructions with your prepaid US return label. Please don't mail anything before then.

  5. We measure and build your setup

    Standard takes 2 rounds. Optimized takes 3.

  6. We install it with you

    On a remote session, then we send your report. Profile Only comes with an install guide.

Standard has 2 rounds and Optimized has 3, plus mail time. We confirm your expected timeline when we review your checklist, before any work starts.

What's included

Standard: 2 rounds (ink limits and linearization, then your profile) and a measurement report. Optimized: 3 rounds, one color area you choose, and a before and after report for each color.

Re-tunes within 30 days of delivery: Standard 1, Optimized 1 (UV and UV-DTF: 2).

Before any paid work, your written quote confirms the scope, price and terms for your printer.

Read the full terms »
See my price »

Prices are on the page. We review every request before any work starts.

Sublimation questions

Which service do I need?

Use the chooser on our pricing page. No RIP: Profile Only. With a RIP: Standard or Optimized. 1 or 2 printers with curing or room problems: On-Site. 3 or more printers, several locations or a print network: a custom Enterprise quote. Not sure: the $195 Audit.

Do I need my own spectrophotometer?

No. You mail your prints and we measure them in our lab.

Can you match Pantone colors exactly?

We get as close as your printer can physically print. With Standard and Optimized, your measurement report shows how close.

Can I use the profile on another printer?

Each profile is built for one printer, ink and film. Each additional identical printer is 50% of your service price.

How long does it take?

It depends on your service and mail time: Standard has 2 rounds and Optimized has 3. We confirm your expected timeline when we review your checklist, before any work starts.

Do you offer refunds?

Remote services can be refunded before you download your chart kit or schedule a session. Once work starts, they can't. Standard and Optimized include re-tunes instead. The Audit can't be refunded once we've measured your chart.

Two ways this can go

Keep going as you are

Adjust by eye, and reprint when a customer notices.

Mail us your charts this week

Print from a setup that's been measured.

Not sure? Start with the $195 Audit »