How it works

How remote color calibration works

You print and mail. We measure, build and install. Here is every step, what to send, and what you get back.

DTF Standard starts at$595 CMYK + White$995 Multicolor

See remote calibration prices Call for on-site service +1 (772) 203-2254

Booking a remote service? Online checkout isn't open yet, so call the same number.

Not sure? Start with the $195 Audit Credited toward any service booked within 30 days.

Mail-in and remote service · Measured in our own lab · Veteran-owned

Illustration: printed color chart film going into a flat mailer.
Illustration

Six steps from order to installed setup

  1. Tell us about your printer

    Your printer, RIP, ink and film. We check every answer before any work starts.

  2. Get your chart kit

    Print instructions and a prepaid US return label arrive by email.

  3. Print the charts

    Use the print settings in your chart kit for that round. DTF: print on your film, apply your powder and cure it, then leave it unpressed; we press and measure it in our own lab. Sublimation: press it onto your normal fabric. UV: print on your final surface with your usual white and varnish layers.

  4. Mail them when we say so

    After we review your setup, we email private mailing instructions with your prepaid US return label. Please don't mail anything before then.

  5. We measure and build your setup

    Standard takes 2 rounds. Optimized takes 3.

  6. We install it with you

    On a remote session, then we send your report. Profile Only comes with an install guide.

Standard has 2 rounds and Optimized has 3, plus mail time. We confirm your expected timeline when we review your checklist, before any work starts.

Your ink, your film

Why it works with your own ink and film

Your printer stays in your shop. The test print comes to us.

You print our DTF chart with your color and white inks on your own film. Apply your adhesive powder, cure it the way you do for jobs and mail the film unpressed. You don't have to change your ink, film or powder, or buy a measuring instrument.

For every square on the chart, we know which color values the file specifies. We press your film in our lab and read the transferred squares with a spectrophotometer, an instrument that measures color. Those readings show how your printer, ink, film and settings behaved under that pressing condition. We use them to build an ICC profile, the file that tells your print software how to reproduce colors for that setup.

Sublimation and UV charts are made on your own material too: for sublimation, you press the chart onto your normal fabric; for UV, you print it on your final surface. What to send, below, covers each one.

What about my heat press?

Our readings describe the sample we pressed. Save a sample before calibration. After setup, print the same file and press it on the garment material you sell, using the same press settings as before. Compare the two finished samples with your approved physical swatch under the same light. If the difference appears only on your press or on one garment, tell us before asking for a new profile.

See remote calibration prices Call for on-site service +1 (772) 203-2254

Booking a remote service? Online checkout isn't open yet, so call the same number.

What to send

What to send us

Wait for your mailing instructions, then send the charts you printed with the settings in your chart kit for each round:

  • DTF: the printed film, powdered and cured but not pressed. Our lab presses and measures it.
  • Sublimation on fabric: the chart printed with your ink and transfer paper, then pressed onto your normal fabric. Ask before mailing rigid blanks.
  • UV: the chart printed on the agreed final surface, with the white and varnish layers your job uses. Ask first about UV-DTF, oversized or unusual samples.
  • Nothing else. Your checklist answers and nozzle check photo come with your order.

What you get

What you get back

  • Standard and Optimized: ink limits and linearization on your RIP, your custom ICC profile, a remote install session and your report
  • Optimized: a before and after report for the color area you chose
  • Profile Only: your custom ICC profile and an install guide
  • Re-tunes within 30 days: Standard 1, Optimized 1 (UV: 2)

Before you print

Get your printer ready first

A round that fails because of your equipment is billed as an extra round ($95, UV: $125).

  • A clean nozzle check
  • Aligned heads
  • Stable curing and room conditions

What's included

Standard: 2 rounds (ink limits and linearization, then your profile) and a measurement report. Optimized: 3 rounds, one color area you choose, and a before and after report for each color.

Re-tunes within 30 days of delivery: Standard 1, Optimized 1 (UV and UV-DTF: 2).

Before any paid work, your written quote confirms the scope, price and terms for your printer.

Read the full terms »
See my price »

Prices are on the page. We review every request before any work starts.

Questions shops ask

Do I need my own spectrophotometer?

No. You mail your prints and we measure them in our lab.

For DTF, do I press the charts?

No. Print the charts on your film with your inks, apply your powder and cure it the way you do for jobs, then mail the film unpressed. We press and measure it in our own lab, so every chart is handled the same way.

Will the profile still fit if I change ink or film?

As the International Color Consortium explains, a printer profile applies to the inks and material it was made for. Changing ink, film, white-ink settings, print mode, substrate or transfer process can change the result. Keep your known-good sample and saved preset. Run a check when something changes; the result tells you whether to keep using the setup or have it remeasured.

When is remote calibration the wrong first step?

If the same file prints differently from run to run, start with repeatability. Missing nozzles, banding, inconsistent curing or uneven press contact call for physical checks. On-Site calibration covers printers, curing and the room for 1 or 2 printers at one site. A profile also can't create a color the ink and material cannot produce. If the target is a particular customer color, identify the physical swatch and the finished material when you call.

How long does it take?

It depends on your service and mail time: Standard has 2 rounds and Optimized has 3. We confirm your expected timeline when we review your checklist, before any work starts.

What if my charts are wrong or late?

An extra chart round is $95 (UV: $125).

Do I pay to ship my charts?

Not within the US. A prepaid return label for US addresses is included with your chart kit.

Do you offer refunds?

Remote services can be refunded before you download your chart kit or schedule a session. Once work starts, they can't. Standard and Optimized include re-tunes instead. The Audit can't be refunded once we've measured your chart.

Is this the same as G7 certification?

No. Our remote service profiles your printer; it does not certify your facility. The International Color Consortium describes building profiles from measured prints and mentions remote profiling services as an option.

There is also an example of off-site evaluation in a different program. For PRINTING United Alliance's G7 Master Facility Certification, a facility works with a certified expert and submits verification prints and measurement data for independent laboratory evaluation. The Idealliance Southeast Asia, Japan & Korea instructions direct applicants in that program to send their printed samples to Rochester Institute of Technology (RIT). The common point is that a lab can evaluate a print made somewhere else. Our customers send their charts to Print Calibration Labs; this comparison is not an endorsement.

Two ways this can go

Keep going as you are

Adjust by eye, and reprint when a customer notices.

Mail us your charts this week

Print from a setup that's been measured.

See remote calibration prices Call for on-site service +1 (772) 203-2254

Booking a remote service? Online checkout isn't open yet, so call the same number.

Not sure? Start with the $195 Audit »