Production desk / DTF

DTF bench tools.

Check whether your setup is ready for profiling, or put a dollar figure on a reprint using your own shop numbers.

01 / CHECK

Is my setup ready?

Use one printer, ink set, print mode and film. This tool organizes your next check. It cannot diagnose a machine or measure color.

Read the checklist without the tool
  1. Keep the printer, ink, film, RIP/driver and print mode unchanged for comparison.
  2. Capture a nozzle check. If you see bands or inconsistent output, investigate stability before buying a profile.
  3. If the shift is mainly after pressing, record the fabric and press settings. In our DTF service you mail printed film; the lab presses and measures it.
  4. A driver-only profile and RIP calibration are different services. Unsure which applies? Request a setup review.
  5. Outside the US, check service and mailing availability before paying or mailing.

02 / COST

What did that reprint cost?

Enter what you actually used. Count film, ink, powder or other materials only once in the combined cost per square foot.

See the formula and work it out by hand

Area (ft²) = film width (in) ÷ 12 × wasted length (ft). Material cost = area × consumables cost per ft². Labor = staff minutes ÷ 60 × hourly rate. Add materials and labor, then multiply by failed runs per week. An average month uses 52 ÷ 12 weeks.

Example only: a 24-inch by 5-foot piece is 10 ft². At $1.50 per ft² plus 15 minutes at $20/hour, one reprint costs $20. Two such runs cost $40/week. This is the cost of your inputs, not a prediction of savings from calibration.

03 / SCOPE

Which $995 service?

Two setups have the same price. Compare the ink set, chart rounds and refinement before requesting a service.

DTF remote RIP calibration · USD
ConfigurationRoundsPrice
Standard · CMYK + White2$595
Standard · Multicolor2$995
Optimized · CMYK + White3$995
Optimized · Multicolor3$1,395

One printer, one print mode, one film. Standard includes two rounds; Optimized adds a third round focused on one chosen color region. Prices are service references; the lab confirms scope with you.

How the optional audit credit works

A paid Color Audit is credited toward an eligible service booked within 30 days. For the $595 Standard CMYK + White service, a paid $195 audit leaves $400. The combined total is $595. Confirm the scope with the lab before paying.

YOUR NEXT STEP

Take the notes back to your shop.

Your entries stay in this page. No account, customer artwork or email is required. Keep a copy and call the lab with the printer, RIP and print mode you want to discuss.